What are the factors that affect the efficiency of medium frequency spot welding machine?

The factors that affect the efficiency of the medium frequency spot welding machine include the following aspects: 1. Welding current factor; 2. Pressure factor; 3. Power-on time factor; 4. Current waveform factor; 5. Surface state factor of the material. Here is a detailed introduction for you:

1. Welding current factors

Because the heat generated by a resistor is proportional to the square of the current flowing through it, the welding current is an important factor in generating heat. The importance of welding current does not only refer to the size of the welding current, but the level of current density is also very important. ※Nugget: refers to the metal part that solidifies after melting at the joint during lap resistance welding.

2. Add stress factors

The pressure applied during the welding process of the medium frequency spot welder is an important factor in heat generation. Pressure is a mechanical force applied to the welding area. The pressure reduces the contact resistance and makes the resistance value uniform. It can prevent local heating during welding and make the welding effect uniform.

3. Power-on time factor

The power-on time is also an important factor in generating heat. The heat generated by power-on is first released through conduction. Even if the total heat is constant, because of the difference in power-on time, the temperature of the welding point is also different, and the welding results are also different.

4. Current waveform factors

The combination of heating and pressure in time is very important for medium frequency spot welding machines, so the temperature distribution at each moment during the welding process must be appropriate. Depending on the material and size of the object to be welded, a certain current will flow through it within a certain period of time. If the pressure is slowly applied to the heating of the contact part, it will cause local heating and worsen the welding effect of the spot welder. In addition, if the current stops suddenly, cracks and material embrittlement may occur due to sudden cooling of the welded part. Therefore, a small current should be passed before or after the main current passes, or pulses should be added to the rising and falling currents.

5. Material surface state factors

Contact resistance is directly related to the heating of the contact part. When the pressure is constant, the contact resistance determines the state of the surface of the welded object. That is, after the material is determined, the contact resistance depends on the fine unevenness and oxide film on the metal surface. Small unevenness is helpful to obtain the desired heating range of the contact resistance, but due to the existence of the oxide film, the resistance increases and local heating occurs, so it should still be removed.

Suzhou Anjia Automation Equipment Co., Ltd. is an enterprise engaged in the development of automated assembly, welding, testing equipment and production lines. It is mainly used in home appliance hardware, automobile manufacturing, sheet metal, 3C electronics industries, etc. According to customer needs, we can develop and customize various welding machines, automated welding equipment, assembly and welding production lines, assembly lines, etc., to provide appropriate automated overall solutions for enterprise transformation and upgrading, and help enterprises quickly realize the transformation from traditional production methods to mid-to-high-end production methods. Transformation and upgrading services. If you are interested in our automation equipment and production lines, please contact us: leo@agerawelder.com