Home Categories Send inquiry

Power Adjustment of Medium Frequency Inverter Spot Welding Machine’s Resistance Welding Transformer?


The resistance welding transformer plays a crucial role in the performance of a medium frequency inverter spot welding machine. It is responsible for supplying the necessary power to achieve effective welds. In this article, we will discuss the power adjustment methods for the resistance welding transformer in a medium frequency inverter spot welding machine.

IF inverter spot welder

The power adjustment of the resistance welding transformer in a medium frequency inverter spot welding machine can be achieved through the following methods:

  1. Tap Changer Adjustment: Many resistance welding transformers are equipped with tap changers, which allow for the adjustment of power output. By changing the position of the tap on the transformer’s winding, the turns ratio and voltage level can be modified, resulting in a corresponding adjustment in power. Increasing the tap position increases the power output, while decreasing the tap position reduces the power output.
  2. Secondary Current Adjustment: The power output of the resistance welding transformer can also be adjusted by varying the secondary current. This can be done by changing the primary current or adjusting the welding machine’s control parameters. By increasing or decreasing the secondary current, the power supplied to the welding electrodes can be adjusted accordingly.
  3. Control Panel Settings: Most medium frequency inverter spot welding machines have control panels that allow operators to adjust various welding parameters, including power. Through the control panel, the desired power level can be set based on the specific welding requirements. The control panel provides a convenient and user-friendly interface for adjusting the power output of the resistance welding transformer.
  4. External Load Adjustment: In some cases, the power output of the resistance welding transformer can be indirectly adjusted by modifying the load conditions. By changing the size or type of the workpiece being welded, the power requirement may vary. Adjusting the load can influence the power drawn from the transformer, thus affecting the overall power output.

It is important to note that the power adjustment of the resistance welding transformer should be done carefully and within the recommended operating limits of the welding machine. Excessive power adjustments can lead to overheating, transformer damage, or poor weld quality.

The power output of the resistance welding transformer in a medium frequency inverter spot welding machine can be adjusted through various methods, including tap changer adjustment, secondary current adjustment, control panel settings, and external load adjustment. Operators should follow the manufacturer’s guidelines and recommendations while making power adjustments to ensure safe and optimal welding performance. Proper power adjustment allows for precise control over the welding process, resulting in high-quality and reliable welds.